영어학습사전 Home
   

billet

다른 곳에서 찾기  네이버사전 다음사전 Cambridge M-W M-W Thesaurus OneLook Google


billet 〔b´ilit〕 굵은 장작, 철봉

billet 〔b´ilit〕 숙사, 숙사 할당 명령서, 일자리, 직업-(병사에)숙사를 할당하다

billet 병사

HS4401
땔나무(통나무, 목편, 작은 가지, 다발이나 이와 유사한 모양으로 한정한다), 칩이나 삭편(削片) 모양인 목재, 톱밥ㆍ목재의 웨이스트(waste)와 스크랩(scrap)[통나무ㆍ브리케트(briquette)ㆍ펠릿(pellet)이나 이와 유사한 모양으로 응결된 것인지에 상관없다]
Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms; wood in chips or particles; sawdust and wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms.

HS44011
땔나무(통나무, 목편, 작은 가지, 다발이나 이와 유사한 모양으로 한정한다)
Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms :

HS7108121000
럼프(lump)ㆍ빌릿(billet)ㆍ알갱이
Lumps, billets and grains

HS7207112000
빌릿(billet)
Billets

HS7207202000
빌릿(billet)
Billets

HS7218992000
빌릿(billet)
Billets

HS7224902000
빌릿(billet)
Billets

HS7403130000
빌릿(billet)
Billets

HS7601202000
빌릿(billet)
Billet

빌레트 Billets
알루미늄빌레트 Aluminum billet
황동빌레트 Brass billet
청동빌레트 Bronze billets
동빌레트 Copper billets
납빌레트 Lead billets
아연빌레트 Zinc billets
강빌레트 Steel billets
티타늄빌레트 Titanium billets
마그네슘빌레트 Magnesium billets

귀금속빌레트 Precious metal billets
비철금속 빌레트 Non ferrous metal billets
철금속 빌레트 Ferrous metal billets
비금속빌레트 Non metallic billets

가. 봉
(a) Bars and rods
"봉"이란 압연ㆍ압출ㆍ인발(引拔)ㆍ단조(鍛造)제품으로서 코일 모양이 아니어야 하고, 그 횡단면이 전체 길이에 걸쳐 균일하고 중공(中空)이 없으며, 원형ㆍ타원형ㆍ직사각형(정사각형을 포함한다)ㆍ정삼각형·볼록정다각형["편평화한 원형"과 "변형된 직사각형"을 포함하며, 이들은 마주보는 두 변이 볼록한 호(弧) 모양이고 다른 두 변은 직선이며 길이가 같고 평행한 것이다]인 것을 말한다. 이 경우 횡단면이 직사각형(정사각형을 포함한다)ㆍ삼각형ㆍ다각형인 물품은 전체 길이에 걸쳐 둥근 모양의 모서리를 가지는 경우도 있다. 횡단면이 직사각형("변형된 직사각형"을 포함한다)인 물품은 그 두께가 폭의 10분의 1을 초과하는 것으로 한정한다. 또한 위와 동일한 모양과 치수를 가진 주조 제품이나 소결(燒結) 제품으로서 제조된 후 단순한 트리밍(trimming)이나 스케일 제거(de-scaling) 이외의 다른 연속가공을 거친 것도 포함한다. 다만, 다른 호에 해당하는 물품이나 제품의 특성이 있는 것은 제외한다. 그러나 제74류의 와이어바(wire-bar)와 빌릿(billet)으로서 선재[와이어로드(wire-rod)]나 관(管) 등으로 제조할 때 단순히 기계에 투입하는 것을 쉽게 하기 위한 목적으로 끝을 가늘게 하거나 그 밖의 다른 가공을 한 것은 제7403호의 구리의 괴(塊)로 본다. 이 규정은 제81류에 해당하는 물품에도 준용한다.
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.Wire-bars and billets of Chapter 74 with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of heading 74.03.This provision applies mutatis mutandis to the products of Chapter 81.


검색결과는 15 건이고 총 48 라인의 자료가 출력되었습니다.    맨위로
(화면 어디서나 Alt+Z : 단어 재입력.)
(내용 중 검색하고 싶은 단어가 있으면 그 단어를 더블클릭하세요.)